VE泵端面凸轮冷/温复合成形技术研究

采用温锻制坯与冷摆辗相结合的复合成形工艺生产VE泵端面凸轮精密成形件,不仅材料利用率可达到95%左右;而且成形件的尺寸精度高,表面光洁度高,能有效地减少后续仿形磨削加工的余量,从而降低了生产成本,提高了生产效率。采用该工艺可以进行大批量生产,能满足我国轻型汽车VE泵的生产需要。     

悬浮液进样原子荧光光谱法测定海洋沉积物样品中的痕量汞

研究了一种使用悬浮液进样原子荧光光谱法测定海洋沉积初中痕量汞的快速简便的方法。控制悬浮液的颗粒粒径在200目(d≤0.076mm)，用磁力搅拌器搅拌以保证悬浮液分散均匀稳定，以水溶液标准作标准曲线，该法方法的检出限为0．001μg/L，加标回收率为90．5％-103．4％，RSD为4．39％。将此法用于标准物质GBw07314、GBw08301、GSBZ50013—88、GSB50014—88和实验室外控样的分析，得到了满意的结果，证明该方法准确可靠。     

冷原子吸收光度法测定工业用浓盐酸中痕量汞

通过进样管道的设计,可能存在的干扰,以及工作参数的详细研究,建立了用冷原子吸收光度法直接测定工业用浓盐酸中痕量汞的分析方法。实际样品测定结果表明,该方法可靠,准确可行。     

天然水体中有机物检测方法的选择与优化

本文选取并优化了一种准确、易行、适合于天然水样中微量有机物的分析技术.天然水样品中有机物通过混合大孔径吸附树脂XAD-2与XAD-7(4:1,V/V)富集并用二氯甲烷洗脱.所有富集的有机物样品中均加入衍生化试剂N,O-双(三甲基硅基)三氟乙酰胺(缩写为BSTFA)硅烷化,最后采用气相色谱-质谱联用仪分析.为了实验的简便,我们的样品为模拟水样(4L添加定量5β-胆烷(挪威Chiron公司)的去离子水).     

提高环境水中纳克级超痕量汞测定灵敏度的研究

对ｎｇ／Ｌ级超痕量汞测定中的消解、测定各步骤对灵敏度的影响进行了研究。得出结论：采用高纯氩气作载、屏气，选择高负压值和高扩展倍率能明显提高灵敏度；选择合适的消解时间和缩短测定时间能使灵敏度略有提高；试剂和玻璃器皿所带给空白的痕量汞对提高灵敏度不利，应作除汞处理。     

QUALITY OF HYDROMETEOROLOGICAL DATA IN COLD REGIONS1

ABSTRACT: Many users of hydrometeorological records are not aware of the number of inconsistencies and biases that occur in hydrometeorological records. Examples are presented illustrating how the exposures of sites for measurement of precipitation, wind, snow on the ground, and evaporation determine to a large extent how useful the records are for estimating areal conditions. For areas where precipitation in the form of snow produces a significant portion of the runoff, a smaller number of quality records may be more valuable for modeling than a much larger number of records of lower quality. Information is presented to show that the overall value of an operational hydrometeorological network is dependent upon how consistent and representative of average conditions the collected records are, especially for mountainous areas in cold regions.     

On the response of 500 gal propane tanks to a 25% engulfing fire

This paper presents detailed data on the thermal response of two 500 gal ASME code propane tanks that were 25% engulfed in a hydrocarbon fire. These tests were done as part of an overall test programme to study thermal protection systems for propane-filled railway tank-cars.

The fire was generated using an array of 25 liquid propane-fuelled burners. This provided a luminous fire that engulfed 25% of the tank surface on one side. The intent of these tests was to model a severe partially engulfing fire situation.

The paper presents data on the tank wall and lading temperatures and tank internal pressure. In the first test the wind reduced the fire heating and resulted in a late failure of the tank at 46 min. This tank failed catastrophically with a powerful boiling liquid expanding vapour explosion (BLEVE). In the other test, the fire heating was very severe and steady and this tank failed very quickly in 8 min as a finite rupture with massive two-phase jet release. The reasons for these different outcomes are discussed. The different failures provide a range of realistic outcomes for the subject tank and fire condition.     

近50年来广东冬季寒害的特征

利用广东省86个地面气象站近50年(1951-2000年)逐日平均气温和最低气温资料,采用针对冬季经济林果的寒害指标,统计分析了近50年冬季寒害的特征.分析得出:(1)广东冬季寒害频数北多南少,各地平均年均1次,其中严重寒害近4成,严重寒害中又以降温型亚类Ⅲ最为典型,占6成以上.(2)寒害过程降温幅度平均达13.6℃,且越往南越大;过程最低气温平均2.6℃,高于冻害临界值0℃;寒害过程降温平均历时4d.(3)寒害分布于10月末至3月底,其中12月到1月累计占85%,月际分布大致呈以1月为峰值的单峰型;亚类Ⅲ12月和2月多于1月,呈双峰分布.(4)1980年是广东冬季气温变化的分水岭,寒害年均综合频数前30年多(160站次),后20年少(96站次).(5)近50年广东冬季寒害年代际变化特征为:50,60,70年代逐渐增强,80年代迅速减弱,90年代有所回升(依然弱于50年代),年代际寒害由强到弱顺序为:70年代,60年代,50年代,90年代和80年代.     

Using multivariate regression modeling for sampling and predicting chemical characteristics of mixed waste in old landfills

Municipal solid waste landfills pose a threat on environment and human health, especially old landfills which lack facilities for collection and treatment of landfill gas and leachate. Consequently, missing information about emission flows prevent site-specific environmental risk assessments. To overcome this gap, the combination of waste sampling and analysis with statistical modeling is one option for estimating present and future emission potentials. Optimizing the tradeoff between investigation costs and reliable results requires knowledge about both: the number of samples to be taken and variables to be analyzed.This article aims to identify the optimized number of waste samples and variables in order to predict a larger set of variables. Therefore, we introduce a multivariate linear regression model and tested the applicability by usage of two case studies. Landfill A was used to set up and calibrate the model based on 50 waste samples and twelve variables. The calibrated model was applied to Landfill B including 36 waste samples and twelve variables with four predictor variables.The case study results are twofold: first, the reliable and accurate prediction of the twelve variables can be achieved with the knowledge of four predictor variables (Loi, EC, pH and Cl). For the second Landfill B, only ten full measurements would be needed for a reliable prediction of most response variables. The four predictor variables would exhibit comparably low analytical costs in comparison to the full set of measurements. This cost reduction could be used to increase the number of samples yielding an improved understanding of the spatial waste heterogeneity in landfills.Concluding, the future application of the developed model potentially improves the reliability of predicted emission potentials. The model could become a standard screening tool for old landfills if its applicability and reliability would be tested in additional case studies.     

Determination of Au(III) and Pd(II) ions by flame atomic absorption spectrometry in some environmental samples after solid phase extraction

A simple and sensitive solid phase extraction method was developed for simultaneous separation and preconcentration of gold and palladium ions with N-(4-methylphenyl)-2-{[(4-phenyl-5-pyridine-4-yl-4H-1,2,4-triazol-3-yl)thio]acetyl}hydrazine carbo thioamide complex on Amberlite XAD-1180 resin before their determination by flame atomic absorption spectrometry. Some analytical parameters such as HNO₃ concentration of the sample solution, amount of complexing agent, sample volume, eluent type and volume, effects of foreign ions and adsorption capacity of the resin were investigated for quantitative recovery of gold and palladium ions. The effects of some anions and cations were also examined. Under optimum conditions, the detection limits for gold and palladium ions were found to be 0.29 and 0.19 μg L^?1, respectively. The preconcentration factor for gold and palladium was 250. After being validated by standard addition and analysis of standard reference material, the procedure was successfully applied to the analysis of sea and stream water, anodic slime, gold ore, soil and electronic waste.